Jules’ favorite bike 1928 101 Scout

[FLFD7]

Just a FYI for those working on 101s, the cork seal that Greer sells for the drive gear on later Chiefs fit the 101…

IMG_2851.jpeg IMG_2852.jpeg

[tfburke3]

After installing that seal I have found it necessary to sand the seal down,or pre crush in a vise until the protrusion is less than flywheel side play,otherwise it will pull the flyweel against case,causing binding and early sprocket shaft thrust washer wear.
I don't think the seal really does much if your flywheel assembly is moving side to side.Probably the large sprocket washer does more.
Tom