The making of a 1936 Knucklehead springer front end

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Jerry Wieland
    replied
    Here is what the weld looked like after I had removed most of the high spots. For some reason my camera must have malfunctioned or I accidentially erased it when I took the pictures immediately after I had gotten done with the disc grinding.

    The side of the leg is done with the metal prepping but you can still slightly see where the weld bead was on the upper part. I cannot emphasize enough how careful to be here when removing metal. There is not that much to begin with so none of the parent metal must be removed.



    Just some more photos before I quit for the night.




    Last edited by Jerry Wieland; 12-20-2013, 09:57 PM.

    Leave a comment:


  • Jerry Wieland
    replied
    Today I got a little more welding done. I found a couple of small dents in the left leg by the brake anchor and decided to weld them shut.



    Then I ground them close to flush using a floppy disc type grinder. The very final metal removal I do on something like this is with a good flat file. It allows slow accurate removal of high spots in the metal.

    I believe the common file is one of the most important tools a guy can have on a job like this.

    Speaking of which does anybody know where or from who a good 'flat' flat file can be gotten. Most files today actually have a slight cup to them which makes the art of filing a lot more difficult.

    Jerry

    Leave a comment:


  • Jerry Wieland
    replied
    Originally posted by riverbend View Post
    If I may ask , what are all the 36 only characteristics of a springer, I ask because I have one and was told by a few collectors that there are several differences including the brake anchor mount , the little dent in the side of the main beam just above the curve, the little groove on the inside of the neck stem ,narrow fender mounts, and yes the little out sweep of both main legs, any others ??, or do I not know what the he:: I am talking about, thanks.
    I do not know of any springer characteristics that are totally unique to 1936. There are a handful like you mentioned that for sure are considered early. I guess I have to admit I do not know about "the little dent in the side of the main beam just above the curve". The one you did not mention is the location of the brake cable clip threaded hole on the left side of the main bridge. That an some assembly technique differences.

    I have at least the remains of 4 or 5 very early OHV springers that I am using for a guide. I am sure that if I miss any of the unique things about an early one at least a couple of guys will jump me about it.

    Jerry
    Last edited by Jerry Wieland; 12-19-2013, 09:37 PM.

    Leave a comment:


  • riverbend
    replied
    If I may ask , what are all the 36 only characteristics of a springer, I ask because I have one and was told by a few collectors that there are several differences including the brake anchor mount , the little dent in the side of the main beam just above the curve, the little groove on the inside of the neck stem ,narrow fender mounts, and yes the little out sweep of both main legs, any others ??, or do I not know what the he:: I am talking about, thanks.

    Leave a comment:


  • duffeycycles
    replied
    Cool thread Jerry ,I wish I had a Tig and talent!...I spent many years with tig on SS ,but that is the easiest

    Leave a comment:


  • Jerry Wieland
    replied
    Chris

    Patience.


    Originally posted by Chris Haynes View Post
    If he is ever going to have that bike judged you had better remove the brake anchor. Clean away all the weld and braze it on.

    Leave a comment:


  • Chris Haynes
    replied
    If he is ever going to have that bike judged you had better remove the brake anchor. Clean away all the weld and braze it on.

    Leave a comment:


  • exeric
    replied
    Beautiful work Jerry. First class.

    Leave a comment:


  • c.o.
    replied
    Thanks for starting this thread Jerry. As always... great stuff!!!!

    Leave a comment:


  • Jerry Wieland
    replied
    Here you can see the difference in how one leg kicks out harder than the other. I do not want to straighten that leg yet but I also do not want to weld it without being straight so I am going to shim it outward until it appears straight to the eye.







    Here is the leg after I have added a few washers behind the bolt. Makes it straighter so I can weld it.




    Here is one last picture of the rear leg all fixture up. One last chance to ensure everything is ready.





    I use a tig welder to weld the springer and I do 2 passes. I also break up the passes a little so as hot to stress the leg too much. The first pass I use very little filler and mainly try to fuse both legs nicely. Sometimes it will spit up impurities and then I have to dig them out. I did not show it but I spent a lot of time cleaning and removing grime before I got to this stage.






    More tomorrow when I start the grinding and smoothing.

    Jerry
    Last edited by Jerry Wieland; 12-18-2013, 08:40 PM.

    Leave a comment:


  • Jerry Wieland
    replied
    Yeah Chris I guess I do not know the exact vintage other than it is definitely newer than 1936.

    Jerry

    Originally posted by Chris Haynes View Post
    It appears that the brake anchor is welded making it October 1944 and later.
    Last edited by Jerry Wieland; 12-18-2013, 07:47 PM.

    Leave a comment:


  • Jerry Wieland
    replied
    Mark As far as I know the only difference between a late 38 thru 40 springer and a 41 to early 42 springer is the forward sweep of the early ones. Is it possible your springer is a tad bit newer than 1939? or maybe it is like a couple of early springers I have had and look like they have never been swept forward.

    Jerry

    Originally posted by MMasa View Post
    Jerry
    A quick question about early springers. You mention that the legs are the 41 up straight version. Did earlier legs sweep forward slightly? If so, by how much. The rear leg that I have for my 1939 knuckle is brazed but it sure looks straight to me.
    Mark Masa

    Leave a comment:


  • Steve Little
    replied
    Hi. I won't be able to give any dimensions at the moment as I am away from home. But I always enjoy Jerry's creative work.

    Leave a comment:


  • duffeycycles
    replied
    Here is a '38 springer ,the front of the legs stay in sraight line with the top.the rear sweeps forward
    Later springers both front and rear sweep to the center
    Last edited by duffeycycles; 12-18-2013, 01:38 PM.

    Leave a comment:


  • Rollo
    replied
    Jeryy,

    I think Steve Little at Race Frame has the dimesnions on the forward sweep on the early springers. I think he might even have the drawings for them. I know I have seen it discussed on here before but contacting him might speeed up the procees for you.

    Tom (Rollo) Hardy
    AMCA #12766

    Leave a comment:

Working...