Announcement

Collapse
No announcement yet.

AMCA Forum is a backwater of the internet

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    I have six motorcycle and five machining-related sites bookmarked on my browser, and all but the AMCA site allow me to see new posts in no more than one click after opening the site. The AMCA site forces me to navigate around the screen to click on four places (and, that's only after I figured out some of the non-obvious places to find them), at which point the use of excess white space only allows me to see five recent posts. Other sites allow me to see anywhere from 12 to 20. As a result, I can click on any one of those other sites, scan for new posts of interest, and if there are none be done with the site in no more than 15 seconds. That's not possible with the AMCA site.

    In addition to this site's poor use of excess white space, the opening page uses valuable space for boxes for 'Latest Topics' (which is fine, but it also should have a box for 'latest posts'), but also 'Recent Blog Posts' (of which there are none), 'Tag Cloud' (which provides the useless information that most posts here are about Harleys and Indians), and 'Trending' (again, useless).

    Of the eleven sites mentioned above, the design of the AMCA's site is the worst. And not by a little bit. I assume the present software can't be significantly reconfigured, and I realize it's futile to hope the AMCA would switch to different software. However, I'm afraid the present site design is too off-putting to attract a wider audience given that most people who frequent the web will be used to much more user-friendly designs. And, most people who don't frequent the web are unlikely to overcome the frustration of using this site. This might have been one of the better designs in 2000, but it is hopelessly outdated and clumsy in 2021.

    In an earlier post someone said he preferred quality over quantity. I completely agree. But quantity and quality are unrelated, and I have no doubt the lack of quantity here is related to the poor design of this website. That means an unknown number people with quality information to post aren't bothering to post it here.

    In the post that started this thread I said I was making an observation, not a suggestion. That applies to the present post as well. Normally, I try not to mention problems when I don't have solutions to propose but, given that I doubt the AMCA will abandon the present software, I can't think of any solution to the issue of lack of traffic on this site.

    Comment


    • #32
      Originally posted by gitguy View Post
      Wow, so cryptic. Thanks for the gouge!
      You're welcome? lol

      Last edited by joe fxs fxr; 02-11-2021, 11:03 AM.
      AMCA #41287
      1972 FX Boattail Night Train
      1972 Sportster project
      1971 Sprint SS350 project
      1982 FXR - AMCA 99.25 point restoration
      1979 FXS 1200 never done playing
      1998 Dyna Convertible - 100% Original
      96" Evo Softail self built chopper
      2012 103" Road King "per diem"
      plus 13 other bikes over the years...

      Comment


      • #33
        What Bosch said....but I'm still glad we HAVE a forum. Smitty

        Comment


        • #34
          We all want more activity, Folks!

          The forum should be a fountainhead, not a backwater; Perhaps we can do little about the appearance, but quality content depends upon us.

          If folks come here for answers (and solutions), don't those usually come from the "Industry"?

          Get more of the vintage motorcycle industry on board, and the 'hobby' will follow.

          ....Cotten

          AMCA #776
          Dumpster Diver's Motto: Seek,... and Ye Shall Find!

          Comment


          • #35
            Originally posted by T. Cotten View Post
            Perhaps we can do little about the appearance, but quality content depends upon us.
            ....Cotten
            BULLSEYE ! I don't care about the mechanics, or appearance of this site; I can adjust to that. I feed on the activity, and participation here regardless of the make of motorcycle, or literary abilities. I love to read posts from neophytes, old timers, experts, and B.S. artists from any country. Each of us can filter what we read, but we need many, and new diverse things to read. If you are a lurker, please jump in.
            Eric Smith
            AMCA #886

            Comment


            • #36
              Originally posted by exeric View Post
              ... If you are a lurker, please jump in.
              '

              Especially if you are service provider!

              Then its a "win-win" for all, with any luck at all....

              ....Cotten

              AMCA #776
              Dumpster Diver's Motto: Seek,... and Ye Shall Find!

              Comment


              • #37
                Originally posted by joe fxs fxr View Post
                Click the two down arrows to the left of the topic title to get to the first unread post
                How 'bout that?! Thanks, Joe!

                Dale

                Comment


                • #38
                  I have been been thinking about this. Would I still be going out to the garage, barn or shed to work on a 30+ year old bike in the winter if AMCA did not exist or if this forum did not exist?
                  Yes. I like bikes especially old bikes and like I to tinker and do maintenance. I'd be doing this even if it was only me. But I would not be doing it as as well or as confidently. I am VERY Happy we have this forum somewhere to go and research a topic and if still in the dark ask a question. For me this is good; I can learn and roll with site changes and upgrades.
                  There was a Jack LaLanne type whose book I read he had a motto regarding his life style and training: "Only the motivated find us," Sometimes I feel that resonates here NOT in a bad way.

                  Comment


                  • #39
                    Originally posted by PaulCDF View Post
                    ,,,There was a Jack LaLanne type whose book I read he had a motto regarding his life style and training: "Only the motivated find us," Sometimes I feel that resonates here NOT in a bad way.
                    Just like the Dumpster Divers' Motto, Paul!

                    Seek, and Ye shall Find.

                    BAGLADY.jpg

                    ...Cotten
                    PS: There, but by the grace of Providence, go I.

                    It was my dumpster.
                    Last edited by T. Cotten; 02-12-2021, 04:56 PM.
                    AMCA #776
                    Dumpster Diver's Motto: Seek,... and Ye Shall Find!

                    Comment


                    • #40
                      AMEN & Amen!!!

                      Comment


                      • #41
                        One advantage of this forum over others should be its judging board but it hasn’t worked for a thread I started last September. One judge replied but I’m still waiting for clarification of info said to be on H-D drawing 47000-40A. Why has no AMCA judge clarified that info? The best solution would be for the drawing to be posted but that hasn’t happened either.

                        What message does that send to members regardless of prospective or current?
                        Eric



                        https://forum.antiquemotorcycle.org/...-1954-panheads


                        Comment


                        • #42
                          Originally posted by exeric View Post

                          BULLSEYE ! I don't care about the mechanics, or appearance of this site; I can adjust to that. I feed on the activity, and participation here regardless of the make of motorcycle, or literary abilities. I love to read posts from neophytes, old timers, experts, and B.S. artists from any country. Each of us can filter what we read, but we need many, and new diverse things to read. If you are a lurker, please jump in.
                          **Well Said Eric. I do have one question tho', where are most of the AMCA staff members lurking at?
                          Oh, i really dig your Biography Eric--hahaha.


                          *M.A.D.*
                          Last edited by JoJo357; 02-13-2021, 05:29 AM.

                          Comment


                          • #43
                            I find one site as confusing as the next. I would personally like to thank Mike Love for doing such a great job maintaining this one. If it wasn't for him this would be a lot worse.

                            Jerry

                            Comment


                            • #44
                              Originally posted by exeric View Post

                              BULLSEYE ! I don't care about the mechanics, or appearance of this site; I can adjust to that. I feed on the activity, and participation here regardless of the make of motorcycle, or literary abilities. I love to read posts from neophytes, old timers, experts, and B.S. artists from any country. Each of us can filter what we read, but we need many, and new diverse things to read. If you are a lurker, please jump in.
                              I agree with Eric and Cotton's comment that we are responsible for the content.

                              I visit the site daily and sometimes several times. I post when I have questions, but I admit I'm not great at following up on my posts. I don't have the experience or expertise that most of you do, so it rare that I'm able to help out with anyone's questions, especially if it's about anything other than mid-forty Indians. But I enjoy reading all the posts and learn something new each time I visit.

                              When I first joined I spent hours and hours reading every post in the Chief section and the info has been invaluable and I could not have completed the restro on my '47 without the help from members of this site. Especially the posts with pictures

                              I had posted that I'd like to see a section where we can post reference photos for others putting our bikes back on the road. I don't plan on having my bike judged, but I did enjoy doing the research and trying to do everything as close to original as possible. Including the little details such as wire and cable routing, correct hardware, and finishes.

                              Not as fun as riding, but a big part of the experience for me.

                              If there is some interest in this, maybe Mike can create a new topic and I'd be happy to start by posting images of my '47 Chief, and I'd welcome the feedback, advice and posts telling me everything I did wrong!

                              Comment


                              • #45
                                I don't think a contributor has to be an 'engine whisperer', paint specialist, electrical engineer, etc to be a very valuable addition to this forum. Mechanical information is a great thing, but there are the aesthetic, historic, and anecdotal experiences that make vintage motorcycling a lifelong journey. I love hearing motorcycles stories from the shop, the road, or the wild side. Those stories and experiences can be as valuable as the bikes because the myths, B.S. and history are what give life to this motorcycle passion we all have.
                                Eric Smith
                                AMCA #886

                                Comment

                                Working...
                                X