Cadmium plating

[T. Cotten]

Its only 'original' once, Folks,...

It ain't never going to be the real thing again.

So how much time and money are you going to throw at faking it? And for whose opinion?

The art is to make it authentic, and if its a living machine, you better be able to touch it up!

.....Cotten

[exeric]

I agree with Tom, that color of painted sheet metal, cadmium plated, and parkerized parts is totally subjective at this point in contemporary (revisionist) vision. I didn't really get what he was saying years ago, but I am slowly coming around to a position of preserving what still exists of 'genuine' finish. Restoration is a world unto itself, and I appreciate that when there is no option because creating a window of what 'was' is also important. I have many friends that have 'restored' bikes that don't get ridden because they don't want to put wear on them. That may be okay for a 'pioneer' bike that isn't practical to ride, but later bikes that have decent horsepower, and adequate brakes should be ridden to keep them young. If you have ever owned a second house that doesn't get used regularly, you know what I mean.

[T. Cotten]

.... preserving what still exists of 'genuine' finish....

But everything else, Eric,...

We fake!

(I used to do it for a living.)

....Cotten

[rlassiter]

Thanks for the input, I am still trying to figure out which way to go.
I have a more urgent issue right now, my generator has quit charging. Armature, field coils and cut out all check good. When the generator was tested before I disassembled would not charge. Any suggestions from anyone?
Thanks

[T. Cotten]

..Any suggestions from anyone?
Thanks

Certainly, Roger!

IndianFrank@yahoo.com

(Since he does not participate here, I encourage you to email him direct, and blame me of course..)

....Cotten

[Jim Grove]

I hope this isn't too far off the topic. Were all the grease fittings parkerized during the war? By the time they built my 1945 Chief EU they should have long run out of cadmium. MY thought is that the grease fittings were parkerized. Anyone now for sure?

[ChiefTwoKicks]

Jim, I finished my '45 EU back in 2022. I parkerized the grease fittings, along with nearly everything bare or formerly plated. The only thing that is "bright" are the stainless spokes and the chrome headlight bezel, the amp meter bezel, taillight bezel. The oil lines and fittings are cad, nuts and small bolts, i.e. cam cover fasteners, small bolts on the cases, primary cover, etc are also cad.
mostly for cosmetic appeal, rather than accurate "correctness". Admittedly, I used my own judgement. I have NOT had the bike officially judged, but I did receive an award (best American) at Dixon in 2022, just because I entered the local display of bikes at the Dixon event.
My bike was actually in the corral where the bikes are offered for sale, I was asked if I wanted to have it "judged" for the bikes not officially entered (since the AMCA changed how bikes are entered for "official" recognition). I'm happy with it, not trying to meet someone else's expectations.
Not at all trophy seeking, but I do want to measure up with my peers, in terms of accuracy and curb appeal. Perfection is subjective.

Roger... C2K thumbnail_IMG-6235.jpg
i

[exeric]

That is stunning, Roger ! The minimalist war time treatment made civilian Chiefs an under-appreciated and beautiful motorcycle.

[bikerdds]

I just had fantastic cad results with Electro lab2 near Tampa, Fl.
Contact John Macy, the plating floor manager. They ship.
No paint can be left on any part as they do not blast. The more prep you do to clean the better, They chemical clean all bare metal.
My original spokes are stunning. Oil pump stunning- blocked all passages that received no plating and/ or taped to aid them. Hardware looks as new.

[PaulCDF]

Bikerdds;
Thanks for the report. Any pictures?

[bikerdds]

Paul, May have a picture of the manifold shortly as it is being returned after having peak seals done. Am away from the project for the summer. Will try and post it if I can figure it out.

[PaulCDF]

Thanks; that would be great. I have some stuff I want plated; wrote to the gent who advertises in our magazine 10 days ago as yet no response. Maybe indisposed.

[Green Indian]

IMG_3231.jpeg I sent some parts for my 1970 Schwinn Manta Ray to Nan Nuys plating and got good, quick service. Sorry it’s not motorcycles related but was happy with my results. IMG_3282.jpeg

[exeric]

I just had fantastic cad results with Electro lab2 near Tampa, Fl.
Contact John Macy, the plating floor manager. They ship.
No paint can be left on any part as they do not blast. The more prep you do to clean the better, They chemical clean all bare metal.
My original spokes are stunning. Oil pump stunning- blocked all passages that received no plating and/ or taped to aid them. Hardware looks as new.

Great recommendation, Marty. I have some things I would like cad plated so I most appreciate the tip.