Announcement

Collapse
No announcement yet.

primary chain replacement

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • primary chain replacement

    Can anyone tell me what's involved in replacing the primary chain on a 48 chief . Specifically how to remove the rear sprocket ? Thanks.

  • #2
    To remove the cluctch basket you have to remove the trans top,nut on clutch basket inside the trans,kick start gear,and gen. drive pulley and key.
    Then the primary chain and sprockets ,clutch and mainshaft can be slid out together.
    Tom

    Comment


    • #3
      Special tools make much easier, Dshurm!

      CHFCTULS.jpg

      CHFCTUL2.jpg

      The wrench it the important one,...

      .....Cotten
      AMCA #776
      Dumpster Diver's Motto: Seek,... and Ye Shall Find!

      Comment


      • #4
        In the AMCA virtual library is the Overhaul and Repair Manual, gives a pretty good description of the process




        Pisten Bully is Harry Roberts in Vermont.

        Comment


        • #5
          Hi , Thanks for the info . It's more complicated than I thought . I also think I have to much end play in the main shaft . I guess I have to figure that out too. Thanks guys.

          Comment


          • #6
            You might find Pisten-Bully's post in this Chief forum of interest: in-frame gearbox rebuild 07-11-2021
            Good Luck keep us posted.

            Comment

            Working...
            X