Can anyone tell me what's involved in replacing the primary chain on a 48 chief . Specifically how to remove the rear sprocket ? Thanks.
-
-
To remove the cluctch basket you have to remove the trans top,nut on clutch basket inside the trans,kick start gear,and gen. drive pulley and key.
Then the primary chain and sprockets ,clutch and mainshaft can be slid out together.
Tom -
Special tools make much easier, Dshurm!
CHFCTULS.jpg
CHFCTUL2.jpg
The wrench it the important one,...
.....CottenAMCA #776
Dumpster Diver's Motto: Seek,... and Ye Shall Find!Comment
-
In the AMCA virtual library is the Overhaul and Repair Manual, gives a pretty good description of the process
Pisten Bully is Harry Roberts in Vermont.Comment
-
Hi , Thanks for the info . It's more complicated than I thought . I also think I have to much end play in the main shaft . I guess I have to figure that out too. Thanks guys.Comment
-
You might find Pisten-Bully's post in this Chief forum of interest: in-frame gearbox rebuild 07-11-2021
Good Luck keep us posted.Comment
Comment