Announcement

Collapse
No announcement yet.

thread size or sizes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • thread size or sizes

    is there anywhere listed or does anyone know the thread size of the grease fitting on a 50 pan for the seat and the brake shaft.

    as a matter of fact is there anywhere listed the exact size of bolts that are for that year bike?

    thanks
    Moose
    aka Glenn

  • #2
    Glenn, I come up with 5/16-32 for the zerk fitting thread pitch. You can get odd ball taps and dies from MSC or McMaster Carr Industrial supply. I use the "Spare Parts" book for all of my bolt length and sizes. That's the bright orange book.
    Eric Smith
    AMCA #886

    Comment


    • #3
      I think Colony has the grease fittings, 4 to a card.
      Mike

      Comment


      • #4
        thanks

        I ordered the spare parts book from antique motorcycle

        I'll order the tap
        Moose
        aka Glenn

        Comment


        • #5
          Glenn. If ya need a grease fitting. I'll drop one in the mail to you. Bob
          AMCA #3149
          http://www.thegoodoldmotorcyclepartscompany.com

          Comment


          • #6
            both are not in the frame and I have to tap them out because they have a lot of paint in them
            Moose
            aka Glenn

            Comment


            • #7
              Be careful. There isn't much there. It is a common size, so you can tap them. I have, but on the t-bar there are only about 3 threads. Cleaning is one of those things you just have to keep at on old machines. Soaking, brushing, air pressure, etc.
              Mike

              Comment

              Working...
              X