thread size or sizes

[Glenn]

is there anywhere listed or does anyone know the thread size of the grease fitting on a 50 pan for the seat and the brake shaft.

as a matter of fact is there anywhere listed the exact size of bolts that are for that year bike?

thanks

[exeric]

Glenn, I come up with 5/16-32 for the zerk fitting thread pitch. You can get odd ball taps and dies from MSC or McMaster Carr Industrial supply. I use the "Spare Parts" book for all of my bolt length and sizes. That's the bright orange book.

[portagepan]

I think Colony has the grease fittings, 4 to a card.
Mike

[Glenn]

thanks

I ordered the spare parts book from antique motorcycle

I'll order the tap

[Robert Luland]

Glenn. If ya need a grease fitting. I'll drop one in the mail to you. Bob

[Glenn]

both are not in the frame and I have to tap them out because they have a lot of paint in them

[portagepan]

Be careful. There isn't much there. It is a common size, so you can tap them. I have, but on the t-bar there are only about 3 threads. Cleaning is one of those things you just have to keep at on old machines. Soaking, brushing, air pressure, etc.
Mike