Announcement

Collapse
No announcement yet.

1964 FLH Windshield Fitment

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1964 FLH Windshield Fitment

    Hello everyone,

    I have a question regarding the fitment of a windshield to a 1964 FLH WITH passing lamps.

    Are these straight brackets also needed when the bike has the passing lamp brackets installed?

    Please see attached pictures
    Attached Files

  • #2
    No, one replaces the other.
    Robbie Knight Amca #2736

    Comment


    • #3
      GREAT

      Thank you very much Rubone

      Comment


      • #4
        Hello again! I have another question. I got really confused.
        Please refer to the attached pictures.

        To fit the spotlight bracket on one side you need the two bolts PLUS the spacer on top (please see picture attached from the parts file.

        But how do you install the bolt below? Without any spacer? Just the bolt and a lockwasher? Then the bracket will touch the Nacelle.

        The 64 I have here has three washers (see picture) which obviously is wrong but I can see that without the spacers/washers the bracket will touch the Nacelle.

        Please assist

        THANKS
        Attached Files

        Comment


        • #5
          Since you do not have turn signals on it the washers are fine, otherwise the signal bracket acts as a spacer on the lower bolt between the nacelle and bracket.
          Robbie Knight Amca #2736

          Comment


          • #6
            Thanks a lot Rubone
            Not planning to use turn signals
            So will leave those washers in place

            Comment

            Working...
            X