Nice looking 47 on eBay

[Jdiesel25]

https://www.ebay.com/itm/11694754727...DN2XMA1FA5Y4WT

[exeric]

That is a beautiful '47. I like the post war Harley-Davidsons as they were so popular in their day and reflect the enthusiasm of motorcyclists in an America that was at it's best. Also, it is so similar to the 1948 BT (which I have) and makes me love them even more. I do notice that the seat looks like an Indian Chumee seat with the square pommel area, unlike the H-D Buddy seat with a more rounded nose. . . More nit picking, but that's what you gotta' think when you look at other people's bikes. . . Just don't say it out loud when the owner is standing there.

[T. Cotten]

I agree, Eric!

I almost never look at ebay, but I had to see if it was one I did:

EDNDI.jpg

But I never would have perforated the sparkwire retainer clip for the choke control stud,

And I would never have left the manifold rough-blasted brass.

(Even though the judges probably wouldn't notice anyway.)

....Cotten

[KNUCK]

Thanks for the post diesel, I looking for a 47 Knuck. I see a few at Mecum and plan to go. Like to see more nit picking on this red one! Chris Haynes you out there?

[Jdiesel25]

No problem. I’ll send you a private message

[Rubone]

Plenty of issues with this one for a fairly low serial number '47. Footboard pads should be painted steel on early production. Those plug wire caps did not yet exist, toolbox should be low mount, spotlights are wrong type. Plug for speedo lock hole and filler for trip stem both missing, kickstand is later production. I'll look for more after my dinner....

[joe fxs fxr]

I don't want to jump to conclusions, but that guy also has an auction for a 71 FX with an aftermarket speedometer he claims is 500 original miles and paint. He must have had a collection or museum, because he's selling a lot of unique low miles bikes. I'm not going to disparage him, but as always, buyer beware.

[T. Cotten]

(Even though the judges probably wouldn't notice anyway.)

....Cotten

I must apologize rather than late edit, Folks.

Certainly they would spot the manifold; Its in Palmer's.

Sorry..

...Cotten
PS: All of these 'issues' would be trivial if it wasn't 99point priced.

[KNUCK]

Plenty of issues with this one for a fairly low serial number '47. Footboard pads should be painted steel on early production. Those plug wire caps did not yet exist, toolbox should be low mount, spotlights are wrong type. Plug for speedo lock hole and filler for trip stem both missing, kickstand is later production. I'll look for more after my dinner....

Yes, but these are pretty easy corrections. Trying to see if bull neck frame on this and any big problems yet unseen. Thanks in advance for any more thoughts on this bike.