G'Day Folks
Ive just finished my 41 Knuckle and am having trouble dialing in my M74B Linkert, motor is a fresh rebuild by a reputable engine builder who cleaned checked and re assembled the carb, the only way to get this to idle and run is to have the low speed needle out 41/2 turns and so of course it runs rich and fouls plugs, I have tried shutting off the high speed needle, no help,
At the starting procedure with the low speed needle set at 3 turns out and the choke on 1 click starts and idles nice but as soon as you turn off the choke it stalls
any and all help greatly appreciated
cheers & Beers
Laurie
Ive just finished my 41 Knuckle and am having trouble dialing in my M74B Linkert, motor is a fresh rebuild by a reputable engine builder who cleaned checked and re assembled the carb, the only way to get this to idle and run is to have the low speed needle out 41/2 turns and so of course it runs rich and fouls plugs, I have tried shutting off the high speed needle, no help,
At the starting procedure with the low speed needle set at 3 turns out and the choke on 1 click starts and idles nice but as soon as you turn off the choke it stalls
any and all help greatly appreciated
cheers & Beers
Laurie
Comment