Announcement

Collapse
No announcement yet.

Indian 741 Solo seat Pans

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    For info, the Harley full pan seat bases weren't perforated until about 1940. When the full pan seat was introduced in 1934, to replace the earlier Mesinger, it looks like the rear plate went from two holes each side to three, to give more adjustment, as on the WLA seat shown earlier..

    Comment


    • #17
      Thanks, Joe. Every time I see a description there is a wide range of years of applicability, like '35 to '53. Let me know if you have one to sell.
      Jerry, thank you for the offer, though Barry and I just swapped. I will keep this in mind, though I only need the support yoke now.
      Happy Thanksgiving.
      -JR

      Comment


      • #18
        JR,
        Sorry, I need the one pictured. I believe Greer sells repops, they have the hole for the seat post but they work if you are not a purist (I’m not and it’s hardly visible)
        Joe

        Comment


        • #19
          Thank you Mr. Slocombe.
          Joe, I think I will hold out a little longer to see if anyone has one. Will probably go the repro route if no one has one to sell.
          -JR

          Comment


          • #20
            Seat Bracket 2.jpg Seat Bracket 1.jpg Joe,
            How can you tell a reproduction bracket from an original? Is there a part number or distinguishing feature to look for?
            I just bought one from Dillon, MT and the description said the seller does not know for sure which it is.

            -JR
            Last edited by JTR249; 11-30-2024, 08:55 AM. Reason: Added photos.

            Comment


            • #21
              JR,
              I never thought to look but sure enough some stamped marks a “2” and an upside down A in a hexagon…..

              IMG_1773.jpeg IMG_1774.jpeg

              Comment


              • #22
                Thanks, Joe. I tried to track down the stamps we could not identify on many Indian Vertical parts and not even some foundry organization members could help at all to identify the factories that were sub-contracted to make them; SDF, CM, the wing and H or the DAC on some cases. Still a mystery.
                -JR

                Comment

                Working...
                X