Tweet
Near as I can tell, this is what you need for the two different size wheel ran on the Chief. Does anyone dispute the pinion gear off set numbers? I may be guessing at the dimensions but one is definitly longer than the other. I don't know why but I'm not 100% sure I haven't mixed them up. Also; if anyone knows what's correct for the 19" wheels on the VL's I would like to know. Thanks guys. Oops, I just found another piece of information that might help.
-
Last edited by John Guntner; 09-10-2025, 06:21 PM. -
John, like you said, there are two different pinions for 18 inch and 16 inch wheels. Kiwi Mike had a small amount of info on the web site.
speedo drive 2.jpg pinion gear.jpg
-
-
I didn't know that. Thanks Ron. Terry Marsh knows his stuff to. My sense is the 19" wheel on the VL's must use the 50T set up. Oh well. CheersComment
-
Dear John, the 4.50 x 18 tyres have the same diameter as the 4.00 x 19 so these would both use the 50 tooth gear, with the 4.00 x 18 tyres the 48 tooth ring gear.Comment
Comment