Will CDE chief motor fit in 1946 frame?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • preacher53
    New Member
    • Feb 2015
    • 6

    #1

    Will CDE chief motor fit in 1946 frame?

    I have indian chief cases stamped CDE without serial numbers--- i am assuming its a 1945 chief motor,,,will it fit in 1946 chief frame? thks
  • tfburke3
    Senior Member
    • Oct 2011
    • 950

    #2
    any chief motor from 1934-1953 is interchangeable with frames from the same year range.
    tom

    Comment

    • exeric
      Senior Member
      • Sep 2005
      • 5955

      #3
      You can run into problems with the chain adjustment screw on the primary. Often times, motorcycles can become a mélange of parts from many different years. Just look at the adjustment screw angle, and your frame. It will be obvious.
      Eric Smith
      AMCA #886

      Comment

      • tfburke3
        Senior Member
        • Oct 2011
        • 950

        #4
        Good point.The inner primary cover and the trans mainshaft and sprocket driver are specific to either rigid or plunger frame,but basic engine mounting in frame is the same.
        Tom

        Comment

        Working...