36 T Oil Lines?

[Knotthed]

Does anyone have any 36 Chief T Oil lines or plans for such?

Thanks.

[Rollo]

Mine have been eliminated as a lot of them were back in the day as they were prone to leaking. Might check Greer to see if they offer them.

Tom (Rollo) Hardy
AMCA #12766

[Knotthed]

No go from Greer. He has clamshell covers without the hole for the T lines. Mine were eliminated also, but I thought I would like to at least have one or a pattern.

[gsottl]

I am quite certain that Indian used the same T-piece as on the gaslines for the T-oillines:

https://www.jerrygreersengineering.c...d=052ACHF44-48

Rgds,
speingfield1901

[Knotthed]

I am quite certain that Indian used the same T-piece as on the gaslines for the T-oillines:

I have not seen any pictures that support the use of the gas line T. It might be a solution, but all of the pictures I've seen, seem to be a tube into a tube at 90 degrees.

The real question is what do they look like where they enter the clamshell valve covers? you cannot see that on assembled units.