18 in. Rear hub lace up pattern 1938

[Americanrider]

I'm having issues with the correct lace up on a '38 rear hub and wheel. It's a 18 inch repop rim, spokes and hub all from from Greer's, the spokes are Buchanan's sold through Greer and I confirmed they are the correct set/part number. I was told the 18 inch is a 1 over 4 lace pattern. If anyone has a 18 inch Rear rim they can look at and give my the correct lace pattern it would be very helpful.

Looking at it from the Non-brake side, Valve Stem marked with blue tape. I need to know what is spoke #1, 2, 3, 4. and I should be able to figure it out from there.


Merry Christmas and Thanks,
~B

[tfburke3]

I'm having issues with the correct lace up on a '38 rear hub and wheel. It's a 18 inch repop rim, spokes and hub all from from Greer's, the spokes are Buchanan's sold through Greer and I confirmed they are the correct set/part number. I was told the 18 inch is a 1 over 4 lace pattern. If anyone has a 18 inch Rear rim they can look at and give my the correct lace pattern it would be very helpful.

Looking at it from the Non-brake side, Valve Stem marked with blue tape. I need to know what is spoke #1, 2, 3, 4. and I should be able to figure it out from there.


Merry Christmas and Thanks,
~B

Looking at nos wheel
1 inside brake side
2inside non brake side
3 outside brake side
4 outside hub side
Merry Christmas
Tom

[Americanrider]

All done, thanks

[Chris Haynes]

That is a rim for a 45" front wheel.

[Americanrider]

As I stated earlier, "All the parts came from Greer's" maybe you should tell them they are selling 45" parts.