Announcement

Collapse
No announcement yet.

DC Linkert Idle Tube

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • DC Linkert Idle Tube

    I've been looking for an idle tube for my Linkert DC-12 through friends, Ebay, etc.without success. I haven't found a used OEM tube and it doesn't appear that they're being re-manufactured. From what I can tell, it appears that these tubes are the same for all Sportsters and for 1966 shovelheads. If anyone has one that they'd be willing to sell, I'm certainly interested. If so, please email me directly at WPedalino@Caldwell;Marnine.com.
    Thank You...
    Bill Pedalino
    Huntington, New York
    AMCA 6755

  • #2
    Have you tried " parts@linkertcarbs.com "

    Comment


    • #3
      Bill, is it 27323-57?
      Dave

      Comment


      • #4
        Yes Dave - that's the one...
        Bill Pedalino
        Huntington, New York
        AMCA 6755

        Comment


        • #5
          Yes - he's doesn't have one.
          Bill Pedalino
          Huntington, New York
          AMCA 6755

          Comment


          • #6
            Yes Dave - That's the one.
            Bill Pedalino
            Huntington, New York
            AMCA 6755

            Comment


            • #7
              Yes - I tried the Linkert guy. He doesn't have any.
              Bill Pedalino
              Huntington, New York
              AMCA 6755

              Comment


              • #8
                Says itís a Bendix part, but may be correct for your Linkert.

                https://www.ebay.com/sch/i.html?_fro...23-57&_sacat=0

                Available in Europe

                27323-57.jpg

                Comment


                • #9
                  Bill, PM me your address; I have misplaced your card.
                  Dave

                  Comment


                  • #10
                    It doesn't look right, Wz507,..

                    (DC on far right in pic.)
                    Late edit: Doh, that's the nozzle. Sorry.

                    It appears to be a simple brass tube, Bill!

                    Unfortunately, I have none currently on the bench to copy, but plenty of 3/16" tubing if you need any.

                    ....Cotten
                    Attached Files
                    Last edited by T. Cotten; 11-19-2020, 12:33 PM.
                    AMCA #776
                    Dumpster Diver's Motto: Seek,... and Ye Shall Find!

                    Comment


                    • #11
                      Cotten,
                      Thanks for looking. Yes, it's a simple tube, but it has a swaged sleeve on the bottom that I would have a hard time duplicating.
                      Bill Pedalino
                      Huntington, New York
                      AMCA 6755

                      Comment


                      • #12
                        Originally posted by T. Cotten View Post
                        It doesn't look right, Wz507,..

                        (DC on far right in pic.)
                        Late edit: Doh, that's the nozzle. Sorry.

                        It appears to be a simple brass tube, Bill!

                        Unfortunately, I have none currently on the bench to copy, but plenty of 3/16" tubing if you need any.

                        ....Cotten
                        Also, there's a small inlet hole (about 0.027" Dia.) drilled through one side of the tube just above the pressed-on sleeve. The sleeve is closed on one side thus acting as s stop so that the fuel only enters through the side hole and drawn up.
                        Bill Pedalino
                        Huntington, New York
                        AMCA 6755

                        Comment


                        • #13
                          Got a pic, Bill?

                          (Next to a ruler would help..)

                          It sounds simple; Can you draw one?

                          ....Cotten
                          AMCA #776
                          Dumpster Diver's Motto: Seek,... and Ye Shall Find!

                          Comment


                          • #14
                            Please see the attached sketch - I hope it's inserted (not the most user-friendly system).
                            The measurements shown are as close as I could get using a mechanical Caliper.
                            Attached Files
                            Bill Pedalino
                            Huntington, New York
                            AMCA 6755

                            Comment


                            • #15
                              3/32" brass tubing is available, Bill!

                              But I don't know if any is 1mm bore.

                              .....Cotten
                              AMCA #776
                              Dumpster Diver's Motto: Seek,... and Ye Shall Find!

                              Comment

                              Working...
                              X