Big Bore question

[T. Cotten]

Gaskets don't blow themselves, Folks.

....Cotten
PS: Even on strokers!

[joe fxs fxr]

Cometic MLS head gaskets hold torque, mine didn't move when I checked them.

[dukekleman]

In order to achieve gasket sealing longevity, I highly recommend that you re-torque your gaskets early and often until you noticed them holding torque and settling has stopped.
Otherwise you will have problems later...

[OWG]

Thank you!

[Rubone]

Pushrod adjustment is the same. Headbolt torque is same as stock. No need to overthink it. Stroker just means trouble, not special.

[OWG]

I just purchased a 93in stroker in a 76 FLH. ( My 1st) I had to take off the rear head of due to a blown head gasket. I'm having the head repaired now but being my first stroker, I was wondering if the pushrods are adjusted the same as a 74 ci motor. Also does someone have headbolt torque specs on a stroker? Thanks.