It's time for me to decide what springs to order for my '48. I've been reading up on how critical this area is to a good running engine. Does anybody have any recommendations. I've been thinking about Crane components but thought I'd see what others thought. Thanks in advance.
-
Cory Othen
Membership#10953 -
Cory, What cam are you going to use? Stock? Don't know where Crane is being made today since the buyout and don't know what their quality is currently like. For a stock cam, I'd try and find some NOS ones, they may even still be service parts, they were used on shovels also, worth a call to the dealership. If not S&S would most likely be my choice for a stock or mild cam, anything with an extra lumpy cam would get springs and collars from JIM's.Brian Howard AMCA#5866 -
Brian, thank-you for the reply. To be honest I don't know what is hiding in there for a cam. I'm going to assume it's stock. I'll see if I can hunt down some NOS springs and collars and I'll check out S&S as well. Thanks again!!Cory Othen
Membership#10953Comment
-
Got some springs from NOS parts the other year, still in the boxes, nice price too.Brian Howard AMCA#5866Comment
Comment