Announcement

Collapse
No announcement yet.

Red Rubbers

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Red Rubbers

    Looking for red rubber brake and clutch pedals for a 50 pan. Anyone know a good source?

  • #2
    I’m convinced that there all made by the same manufacture and distributed by everybody in the after market racket. I have no experience with after market grips but the kicker peddle rubber, foot clutch pads and floor board rubbers absolutely suck. They are so soft compared to the oem ones that I have chosen not to use them. I just keep pounding the halls of Fleese-Bay waiting on originals to pop up. Every once an a while a pair of vintage auto brake peddle rubbers show up under #60 made by Anchor Rubber Co. These are great for the clutch and brake but ya got to buy two pairs. The checker patern is just slitly differant than the oem ones but I've never seen them in red. I have always wondered if Harley made red accseory springer grips? Bob L
    AMCA #3149
    http://www.thegoodoldmotorcyclepartscompany.com

    Comment


    • #3
      The only red grips H-D made for the springer bars were the hard plastic type, never the rubber ribbed ones. And they never made colored pedal pads until the white ones in the '60s that are the slip over type. All the red pads are crap like Bob says!
      Robbie
      Robbie Knight Amca #2736

      Comment


      • #4
        Thanks Rob, You just ansewed something I've pondered for a long time. Bob L
        AMCA #3149
        http://www.thegoodoldmotorcyclepartscompany.com

        Comment


        • #5
          I can supply you with any rubber part you need in red. Old aftermarket stuff. I have lots of it. Not for a restoration but great for a custom.
          Be sure to visit;
          http://www.vintageamericanmotorcycles.com/main.php
          Be sure to register at the site so you can see large images.
          Also be sure to visit http://www.caimag.com/forum/

          Comment


          • #6
            Chris, yes I am interested. Can only find them in black and white. I need three that match, one 1/2 pedal and two full pedals.
            Thanks

            Comment


            • #7
              I akso have footboard mats, hand grips, mudguards, kicker pedals.
              Be sure to visit;
              http://www.vintageamericanmotorcycles.com/main.php
              Be sure to register at the site so you can see large images.
              Also be sure to visit http://www.caimag.com/forum/

              Comment


              • #8
                Chris, just need the pedal pads. Let me know how much and how you want handle this transaction.

                Comment


                • #9
                  it will be a few days before i can dig them out.
                  Be sure to visit;
                  http://www.vintageamericanmotorcycles.com/main.php
                  Be sure to register at the site so you can see large images.
                  Also be sure to visit http://www.caimag.com/forum/

                  Comment


                  • #10
                    Chris,
                    Any other colors? and what would be the price for one 1/2 pedal, two full pedals and hand grips. both grips 1 1/8"???Thanks, B.Baker



                    Baker, William, R......
                    AMCA# 15164......"50" FL, "34" VLD....

                    Comment


                    • #11
                      The pedals are all gone. I have grips, footboard mats, mudflaps, and kicker rubbers.
                      Be sure to visit;
                      http://www.vintageamericanmotorcycles.com/main.php
                      Be sure to register at the site so you can see large images.
                      Also be sure to visit http://www.caimag.com/forum/

                      Comment


                      • #12
                        Originally posted by Rub View Post
                        The only red grips H-D made for the springer bars were the hard plastic type, never the rubber ribbed ones. And they never made colored pedal pads until the white ones in the '60s that are the slip over type. All the red pads are crap like Bob says!
                        Robbie
                        When you say slip over type are you referring to the 63 up popsicle style kicker pedal? I thought all you could get for kicker pedals, floorboard rubbers, and clutch and brake pedal rubbers in 50 were black. I know you could get coloured handlebar waffle grips in red, white, blue and yellow besides black in 50. White kicker pedal rubbers became available in 61, and the ribbed handlebar grips were a 62 introduction.
                        Last edited by cdndewey; 02-27-2011, 04:06 PM. Reason: spelling error

                        Comment


                        • #13
                          And the brake peddle was also slide on.
                          AMCA #3149
                          http://www.thegoodoldmotorcyclepartscompany.com

                          Comment


                          • #14
                            When you say slip over type are you referring to the 63 up popsicle style kicker pedal? I thought all you could get for kicker pedals, floorboard rubbers, and clutch and brake pedal rubbers in 50 were black. I know you could get coloured handlebar waffle grips in red, white, blue and yellow besides black in 50. White kicker pedal rubbers became available in 61, and the ribbed handlebar grips were a 62 introduction.
                            The red grips I was referring to was a response to the post before mine. The springer colored grips were hard plastic, not rubber. And the ribbed grips I was referring to were factory black rubber springer grips.
                            And the white pedal pads from the '60s were the first colored pedal pads from H-D. Those are brake and clutch pedal pads (slip on type!), I never mentioned anything about kicker pedals or other '60s accessories as that was not a question I was responding to.
                            Colored Kicker pedals in plastic were available in the late '40s and then again in the '50s. They were hard plastic. All the rubber two piece kicker pedal pads in color were aftermarket. Also plenty of plastic ones from Beck and CMS. Grips too.
                            However those parts were never supplied by H-D in colored rubber.
                            Robbie
                            Robbie Knight Amca #2736

                            Comment


                            • #15
                              The Red, White, and Green parts I had were modern repops.
                              Be sure to visit;
                              http://www.vintageamericanmotorcycles.com/main.php
                              Be sure to register at the site so you can see large images.
                              Also be sure to visit http://www.caimag.com/forum/

                              Comment

                              Working...
                              X