Shop Recommendation

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • cdndewey
    replied
    Originally posted by Chris Haynes View Post
    If it is a PDF file you should also send it to the AMCA library. They are always looking for more items.
    Was going to do that Chris. I have a few things for the library.

    Leave a comment:


  • lrcormier
    replied
    Originally posted by Chris Haynes View Post
    Phil at Knuckleworks/Cycleworks is a stand up guy. His small shop is crammed to the gills with used OEM parts. He is the one reproducing the right on Knuck and Pan engine cases. He also does excellent case repair.
    Also contact Wayne's in Santee, CA.
    Hey Chris, happen to be off this week and stopped in on Wayne's, unfortunately his hours seem to be very limited (Friday-Sunday), I guess I should of called first. I will try stopping in on him another time.
    Louis

    Leave a comment:


  • lrcormier
    replied
    Originally posted by cdndewey View Post
    Hello iccormier welcome, sounds like a couple of nice projects you have there. I have an original 52 sales brochure that I scanned and sent to another forum member. If you are interested will send you a copy of it, just PM me your e-mail address.
    Wow, PM sent. I've been to Vancouver Island, loved it. A lot of port visits while 30 years in the NAVY.
    Louis

    Leave a comment:


  • Chris Haynes
    replied
    Originally posted by cdndewey View Post
    Hello iccormier welcome, sounds like a couple of nice projects you have there. I have an original 52 sales brochure that I scanned and sent to another forum member. If you are interested I will send you a copy of it, just PM me your e-mail address.
    If it is a PDF file you should also send it to the AMCA library. They are always looking for more items.

    Leave a comment:


  • cdndewey
    replied
    Hello iccormier welcome, sounds like a couple of nice projects you have there. I have an original 52 sales brochure that I scanned and sent to another forum member. If you are interested I will send you a copy of it, just PM me your e-mail address.

    Leave a comment:


  • Chris Haynes
    replied
    The best advice I can give about restoring is to do your homework and know what to do before you start doing it.

    Leave a comment:


  • lrcormier
    replied
    Originally posted by Chris Haynes View Post
    Phil at Knuckleworks/Cycleworks is a stand up guy. His small shop is crammed to the gills with used OEM parts. He is the one reproducing the right on Knuck and Pan engine cases. He also does excellent case repair.
    Also contact Wayne's in Santee, CA.
    Thanks Chris. Santee is definitely closer so I will visit Wayne's and see if I get good vibes. I don't think my motor needs a lot of work, mostly I need it put together properly with the addition of a few missing parts, I hope. I bought the PAN from a guy in Spring Valley (Gary Ball), I'm not sure how much of it is original but he restored bikes and was basically going to build this for himself until he contacted cancer. So I'm not necessarily trying to build a show bike but rather just something that looks good, mostly correct, and something I can occasionally ride.
    Again, thanks for your quick response, I'm sure I will have more questions in the future.
    Louis

    Leave a comment:


  • Chris Haynes
    replied
    Phil at Knuckleworks/Cycleworks is a stand up guy. His small shop is crammed to the gills with used OEM parts. He is the one reproducing the right on Knuck and Pan engine cases. He also does excellent case repair.
    Also contact Wayne's in Santee, CA.

    Leave a comment:


  • Paquette
    replied
    Look for Chris Haynes to reply to your post. He must be out drinking sodas or some other concoctions. He is in your area---M--6671

    Leave a comment:


  • lrcormier
    started a topic Shop Recommendation

    Shop Recommendation

    Hi everyone, I'm a new member and of course need help. I purchased a couple basket cases over 25 years ago, a 52 PAN and 47 INDIAN. The PAN actually doesn't need a lot of work but my experience is only on SHOVELS and need recommendations for a good engine shop in SOCAL. I live in San Diego so anything between here and LA would work. I've contacted a place near LA called KNUCKLEWORKS (AKA CYCLEWORKS) and they claim they can help on anything PAN. A little about myself, I retired from the NAVY in 2006 after 30 years, I've owned a FLH since 1972 but my newest HD is a 1982, my primary ride nowadays is a 2005 GOLDWING. Both basket cases have been in my garage for the last 25 plus years and the PAN is in the best condition and have almost everything for it, the INDIAN needs a complete rebuild and is missing some stuff but nothing to difficult to acquire. After recently getting motivated and some internet research (way more information available nowadays then 25 years ago), this site and AMCA seemed like a good source for information and help so decided to join.
    Louis
Working...