went to take my '50 on a run today and once again taiwan teds kicker gears took a crap ,ended up tearing it down .. need to get this bike fixed to ride out to jefferson fri. my question is does anyone make qaulity kicker gears that will hold up more than a season?
Announcement
Collapse
No announcement yet.
kicker gears
Collapse
X
-
If you want a real good one here are some Baker parts...http://www.brightonhd.com/searchResu...idaa3157zz~r=~
-
Flthead it sucks! I mean big time. It’s not the gears that are bad but the heat treating process. As the price of energy goes up. The quality goes down. Get it out the door as soon as possible to keep the profits up. I got two bad ones from Harley twenty years ago from the same batch. Sure they refunded my money but that doesn’t make up for jump starting my bike in 94 degree heat and wreaking my weekend. These days it’s very rare that anybody does in house heat treating. There at the mercy of the sub contractor. Come visit me at Jefferson and I’ll buy ya cocktail and chear ya up. Bob L
Comment
-
kicker gears
I see them pop up on ebay all the time but not sure if they are OEM or aftermarket junk. Try NOS parts.com. He has them sometimes or I have had buddies buy the Jims one and no issues with those so far and 4-5 years so far on them.
Rollo
AMCA #12766
Comment
-
I'd stick to Baker if possible, I know their quality is still good. Been having some problems with stuff that comes in packaging adorned by the trusty bar & shield, read the fine print. Packaged in USA, contents made in Mexico and China. Just had some gaskets that I got from H-D that weren't even close to being made to the proper size, The rollers on genuine H-D tappets only last half as long as the ones I replace myself on old tappet bodies. Don't know guys, but I think actual working, quality parts are going to get hard to find and real expensive.Brian Howard AMCA#5866
Comment
Comment