whats in my hole

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Glenn
    Member to Remember
    • May 2007
    • 403
    #1

    whats in my hole

    anyone know what the hole was used for behind the front lifter block on a 50 pan. It still looks like it is a half inch deep and maybe 1/4 inch or so.
    Attached Files
    Last edited by Glenn; 01-24-2009, 10:33 AM. Reason: picture of my hole
    Moose
    aka Glenn
    Tags: None
    • Jerry Wieland
      Senior Member
      • Jan 2006
      • 2012
      #2
      That hole should be blocked. It was where the factory drilled in the cam/tappet oil for 48 and up.

      Jerry

        Comment

        • Glenn
          Member to Remember
          • May 2007
          • 403
          #3
          it does not go thru just the first 3/8 in nothing is in it but it is blocked
          Moose
          aka Glenn

            Comment

            • motorhead1
              Senior Member
              • Dec 2006
              • 171
              #4
              It is a cross drill passage to allow oil feed to the heads.
              Ride 'em. Don't hide 'em.
              Dan #6938 FUBO

                Comment

                • Jerry Wieland
                  Senior Member
                  • Jan 2006
                  • 2012
                  #5
                  Sounds to me like it is exactly like it is supposed to be.

                  Jerry

                    Comment

                    • T. Cotten
                      Gadfly from the Dumpster
                      • Jun 2001
                      • 8222
                      #6
                      There should be a pressed-in welch plug at the bottom of it.

                      Don't fix it!

                      ....Cotten
                      AMCA #776
                      Dumpster Diver's Motto: Seek,... and Ye Shall Find!

                        Comment

                        Previous template Next
                        Working...