Tweet
Back in my younger years I owned a 52 serve-car. The shock on the springer had Monroe on the front of it with a bunch of patent numbers. I keep seeing shocks on Fleese-Bay that are so called oem but are blank of manufacture. Anyone got a take on this? Bob
-
Maybe we need a thread for for the ice cream wagons.
Mike -
Aftermarket shocks.Comment
-
Ice cream wagon lots of fun. Ice cream wagon all most got Bob killed. Had to run the mag wheels at all nost 5 psi to avoid being put into obit by the New York City pot holes. Na Paps I ruled out the aftermarket theory.Last edited by Robert Luland; 11-08-2008, 05:04 AM.Comment
-
When I was looking for one a few years back, the few I did find that said “Monroe” on them where well past any usefulness. I couldn’t find any info on being able to rebuild them, so that may not be possible.
Seems that most of those old “Monroe” shocks that still work, are found on bikes that are ridden regularly. They sure do make a big difference in the ride.------------
Steve
AMCA #7300Comment
-
How can you rule out the fleecebay aftermarket theory when there is no manufacture ? All oem ones I ever saw were Monroe.Comment
-
And the aftermarket shocks are crap.Comment
-
Paps what ment to say was that the ones that I've come across are old. Made way before they started reproing them.Comment
-
Back in the mid 1970's I could actually get the shock from Monroe but had to cut the stem off one end and the loop off of the other and then weld the HD brackets on. The earlier HD shocks show the same treatment but the later ones seem to have been manufactured especially with HD in mind. By the late 1970's I could no longer get them. Seems they were a shock on a tractor seat or something.
JerryComment
-
Is there a noticable difference in the ride with a shock vs the ride control?Comment
-
-
If the shock isn't shot .... YES. Actually a very nice ride, of course proper tire inflation is still critical.Brian Howard AMCA#5866Comment
-
A good shock has strong resistance both in and out. PapsComment
Comment