Announcement

Collapse
No announcement yet.

Turn indicator wiring

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Turn indicator wiring

    The King of the Highway option included factory turn signals....I understand there are no factory wiring diagrams for these...does anyone know if the wires were in their own conduit (two conduits going into the rear fender) or in the conduit for the brake/running light? A picture would be awesome! Logic tells me since they were an add on, they are in tier own conduit,
    Thanks

  • #2
    Originally posted by leversole View Post
    The King of the Highway option included factory turn signals....I understand there are no factory wiring diagrams for these...does anyone know if the wires were in their own conduit (two conduits going into the rear fender) or in the conduit for the brake/running light? A picture would be awesome! Logic tells me since they were an add on, they are in tier own conduit,
    Thanks
    They were in the same conduit on my 1960. It all runs inside the rear fender, or mudguard kept t by the fold overs inside.
    Last edited by Saddletramp; 01-30-2026, 03:27 AM.

    Comment


    • #3
      Leversole, turn signal wiring diagrams showed up in the 1968-69 year example. Its in your factory service manual.

      Comment


      • #4
        What year? CCF04142012_00000.jpg
        Robbie Knight Amca #2736

        Comment


        • #5
          Mine is 1964...Thanks all

          Comment


          • #6
            Robbie, is there a Diagram to go with that parts list?

            Comment


            • #7
              Originally posted by leversole View Post
              Robbie, is there a Diagram to go with that parts list?
              CCF04142012_00004.jpg CCF04142012_00003.jpg CCF04142012_00002.jpg
              CCF04142012_00001.jpg
              Robbie Knight Amca #2736

              Comment


              • #8
                CCF04142012_00005.jpg CCF04142012_00006.jpg
                Robbie Knight Amca #2736

                Comment


                • #9
                  Amazing. Rubone, Thanks for sharing.

                  Comment


                  • #10
                    It is amazing Rubone. It will definitely help. Thanks.

                    Comment


                    • #11
                      Wow! like ither said, Amazing Thank you!

                      Comment


                      • #12
                        I just found the harness section (missed it before?!?) in the "Bible", explains everything as far as wires and conduit!
                        Last edited by leversole; Yesterday, 02:53 PM.

                        Comment


                        • #13
                          Lookey what I found! Don't know if was factory or not but this 3/8s hole is close to the brake/run 3/8s hole...someone stuck the turn wires through the brake/run grommet...I will remedy!
                          Also it is clear that, at least in 1964, the turn signal wires ran in their own conduit from the front terminal block to the fender!

                          TurnSignalFenderHole.jpg

                          Comment

                          Working...
                          X