Announcement

Collapse
No announcement yet.

>>1948<<

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • >>1948<<

    *Surprised to see this still hanging around.


    1948 Harley-Davidson Panhead


    https://youtu.be/mYQJ1XqNDx0?si=kcvTxibc0wWxNked


    *M.A.D.*
    Last edited by JoJo357; 12-26-2025, 03:21 AM.

  • #2
    I don't want to be that "guy", but there is a lot of aftermarket stuff on that '48'. It's a nice looking '48, and I think it has solid bones and could be taken to the next level with some good research and conscientious shopping at swap meets to find the genuine stuff. The 1948 BT is a true stepping stone for Harley-Davidson.
    Eric Smith
    AMCA #886

    Comment


    • #3
      Eric, i totally agree. But it always amazes me, that the minor critique of a semi~original motorcycle seems to always override the fact that for the price involved & collectability, it is still an excellent within reason candidate for someone starting out to own an antique motorcycle, and not break the bank! When I purchased a 1938 ULH many m()()ns ago, the owner robbed a few key parts off the original '38 flatty to finish off his 1938 Knucklehead restoration. Which was probably why he bought the '38 ULH in the first place. But, it didn't discourage me, I just bought quality aftermarket replacements so I could hit the wind & enjoy, while i hunted down the original pieces. Either way, for what it's worth, this is a nice 1948 for the money.
      *Ps. Funny, if this...Was a knucklehead, It would be covered over like a wet blanket.



      https://youtu.be/mYQJ1XqNDx0?si=wSb0inWZl9vvGRQE <------*Restored 30 years ago, gee~if memory serves me, isn't that around the time the AMCA was promoting restoring motorcycles as opposed to keeping them original?

      C0E767D5-2CEA-459C-A8D0-951535C2409E.jpeg

      *M.A.D.*
      Last edited by JoJo357; 12-29-2025, 02:15 AM.

      Comment


      • #4
        I agree that there's a lot that's good about that bike. Supposedly the big stuff is right... sheet metal, frame, fork, engine numbers look good etc. Any of the cheesy, chromed up aftermarket stuff can be replaced little by little as Eric mentioned.
        The reason it's "still hanging around" is that $34,500 is a bit out of the reasonable ball park IMO.

        Edit: Of course, I'm old. Pretty much everything seems to be out of the reasonable ballpark to me anymore.
        Last edited by droptopford; Yesterday, 10:41 AM.

        Comment

        Working...
        X