Linkert Manifold Gaskets

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • otis71
    Senior Member
    • Jul 2015
    • 584
    #1

    Linkert Manifold Gaskets

    Any suggestions on the best manifold gaskets to use? I have some smooth ones I believe came from Colony kits and also have some course ones that look like asbestos I bought in bulk at Oley. Or none of the above?
    Tags: None
    • T. Cotten
      Gadfly from the Dumpster
      • Jun 2001
      • 8216
      #2
      Asbestos sounds yummy, Otis!

      Otherwise, most modern productions have an embedded sealant.

      Beware of three-bolt gaskets cut disastrously close to the top bolt hole.

      ITWGASK1.jpg

      ....Cotten
      AMCA #776
      Dumpster Diver's Motto: Seek,... and Ye Shall Find!

        Comment

        • exeric
          Senior Member
          • Sep 2005
          • 5964
          #3
          What a useful observation and advice, Tom. I'm putting carburetor on tomorrow, so I'll be looking at that gasket. Thanks.
          Eric Smith
          AMCA #886

            Comment

            • T. Cotten
              Gadfly from the Dumpster
              • Jun 2001
              • 8216
              #4
              Originally posted by exeric View Post
              What a useful observation and advice, Tom. I'm putting carburetor on tomorrow, so I'll be looking at that gasket. Thanks.
              If your manifold flanges are ground/lathe-cut, Eric,..

              Greased butcher paper will do.

              Takes a good gasket hammer though.

              ....Cotten
              AMCA #776
              Dumpster Diver's Motto: Seek,... and Ye Shall Find!

                Comment

                Previous template Next
                Working...