Wiring harness 52 pan

[lrcormier]

I'm looking for a wiring harness for 52 panhead and some people have stated that a harness by Bruce Linsday is best and closest to OEM. Where can I purchase this harness? Or if no longer being made what's the best one to get?

[jwl]

I just did a 51. I got my harness from a well known supplier. Supposed to be the best available and probably is. That being said, it's still a far cry from an original. The asphalt loom is nowhere near what was used in 51 or 52. I fit well but doesn't look right. It wont fit through the holes in the dash base either.

[Schorsch]

Bruce Linsday sold his wiring harness business to Chris Vacarro, search for "Vintage MC Supply". Chris do it excellent! George

[lrcormier]

I did find Vintage MC Supply has a harness for 145 and someone on the Panhead/Flathead forum site said Toms NOS has a good harness and his is 90. 55 dollars difference is quite a spread so I will decide between these two.

[1950Panhead]

55 dollars difference is quite a spread so I will decide between these two.

It's peanuts, always buy most expensive, there is a reason.

[lrcormier]

jwl, I sent you a PM.

[jwl]

jwl, I sent you a PM.

Reply sent.