Announcement

Collapse
No announcement yet.

'65 Triple Trees

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Originally posted by upsrod View Post
    The '65 lower tree used with 5 gallon tanks would not have the notches in the stops....mine are welded up.
    So notched stops are '65-only-3.5-only?

    Uhoh.

    ....Cotten
    AMCA #776
    Dumpster Diver's Motto: Seek,... and Ye Shall Find!

    Comment


    • #32
      I need a set for 3.5 gallon tanks if anyone is selling!
      Attached Files
      Last edited by Zedder; 08-18-2019, 09:24 AM.

      Comment


      • #33
        Are you sure about this, Rod?

        It don't make much sense (as if we weren't talkin' '65s...)

        Can you point to a purpose?
        My un-notched tree ran great for a couple of decades with 3.5s on a '65 frame.
        (Until a little old lady from Tiskilwa wiped me out from behind with a Chrysler....)

        My two adjustables ain't notched either.

        What else could be different to need notches?
        The tanks were the same as '63-'64, by my reckoning.
        Its gotta be big tanks, or some control sheath or wiring change?

        If I had a memory, I would remember if the two '66s I did had them.
        Somehow, notches are just too familiar.
        (Doh! One of the '66s had 3.5s... I shoulda taken better notes a quarter of a century ago.)

        ....Cotten
        PS: So, comparing the two different solo trees, it looks like an endmill operation.

        But why?
        Last edited by T. Cotten; 08-18-2019, 04:18 PM.
        AMCA #776
        Dumpster Diver's Motto: Seek,... and Ye Shall Find!

        Comment

        Working...
        X