Identify brake drum Harley? - AMCA Forum

NOTICE: New member email requirements now in effect. Longtime member having trouble logging in? Please review the requirements here.

Only registered users may post new messages on this forum. You must be an AMCA member to register. Click the register link on the top right to proceed.

If this is your first visit, be sure to check out the FAQ by clicking the link above. To start viewing messages, select the forum that you want to visit from the selection below.
If you are NOT an AMCA Member and would like to join Click Here

X

jorrow

Senior Member

Join Date: Feb 2008

Posts: 317
- Share
- Tweet
#1

Identify brake drum Harley?

05-14-2018, 01:00 PM

Ok so the drum on the left in question looks like a mechanical big twin but is quite a bit deeper. Other than that they seem identical. drum.JPG drum2.JPG
Tags: None
govmule84

Fat & Cranky

Join Date: Dec 2014

Posts: 178
- Share
- Tweet
#2

05-14-2018, 01:42 PM

I'm no expert, but ain't that a juice drum?

Last edited by govmule84; 05-14-2018, 01:46 PM.
Comment
jorrow

Senior Member

Join Date: Feb 2008

Posts: 317
- Share
- Tweet
#3

05-14-2018, 02:47 PM

I do not believe so, most hydraulic were cast iron, these are both steel.
Comment
wideglide38

Senior Member

Join Date: Jul 2008

Posts: 656
- Share
- Tweet
#4

05-14-2018, 03:03 PM

I thought the same as govmule. The deeper drum would have room for the wheel cylinder.

William Edwards, AMCA #10035

Attend the 2019 Southern National Meet at Denton Farmpark, NC, 17-18 May 2019
http://www.amcasouthernnationalmeet.com/
Comment
Rubone

Senior Member

Join Date: Aug 2004

Posts: 4245
- Share
- Tweet
#5

05-14-2018, 05:02 PM

Early '58 drum for juice brakes is stamped steel. Cast drums started in mid '58 due to drum expansion issues.

Robbie Knight Amca #2736
Comment
jorrow

Senior Member

Join Date: Feb 2008

Posts: 317
- Share
- Tweet
#6

05-14-2018, 05:10 PM

One more pic. I knew about '58 but wasn't sure if this was it.drum3.jpg
Comment
jorrow

Senior Member

Join Date: Feb 2008

Posts: 317
- Share
- Tweet
#7

05-14-2018, 05:12 PM

Thanks for every ones help.
Comment

Previous template Next

Working...

X