Announcement

Collapse
No announcement yet.

1965 Electra Glide clutch and brake levers

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1965 Electra Glide clutch and brake levers

    Hello,

    Can someone provide a picture of the correct levers for the clutch and brake on a 1965 Electra Glide? I know there are no holes in the perches since the mirrors clamped to the bars but do the levers have the ball on the end or are they straight? I've been searching but coming up with conflicting results.

    Thanks!
    Craig (Delaware)
    Delaware Bay Chapter
    Perkiomen Chapter
    AMCA Member #1011

  • #2
    They are straight and have the ball on the end...the same lever as the later models, but no hole in the perch. Your confusion probably comes from assholes on eBay claiming the lever they are selling is a 1965 with no hole and is in fact a 1964 and back lever.

    Comment


    • #3
      65 thru 67 levers don't use the white plastic top hat bushings.
      VPH-D

      Comment


      • #4
        Originally posted by upsrod View Post
        They are straight and have the ball on the end...the same lever as the later models, but no hole in the perch. Your confusion probably comes from assholes on eBay claiming the lever they are selling is a 1965 with no hole and is in fact a 1964 and back lever.
        Thanks for the clarification. And you are right about the sellers on eBay!
        Craig (Delaware)
        Delaware Bay Chapter
        Perkiomen Chapter
        AMCA Member #1011

        Comment


        • #5
          Originally posted by VPH-D View Post
          65 thru 67 levers don't use the white plastic top hat bushings.
          VPH-D

          Thank you!
          Craig (Delaware)
          Delaware Bay Chapter
          Perkiomen Chapter
          AMCA Member #1011

          Comment


          • #6
            This info also applies to 1965 Sportsters as well. Bob L
            AMCA #3149
            http://www.thegoodoldmotorcyclepartscompany.com

            Comment


            • #7
              Here is a picture of '65 lever and brackets
              Bike 027.jpg

              Comment


              • #8
                Thanks for the picture.
                Craig (Delaware)
                Delaware Bay Chapter
                Perkiomen Chapter
                AMCA Member #1011

                Comment

                Working...
                X