Tweet
Is anyone running a 1 1/2 inch belt drive with the original primary cover. Any problems? I'm looking at a BDL brand. Any info will help.
thanks, Scott
thanks, Scott
-
-
It should fit.
A belt drives enemy is heat. Get a repop inner primary cover and by using a 1/2", or larger, drill bit make it look like a piece of Swiss cheese.Be sure to visit;
http://www.vintageamericanmotorcycles.com/main.php
Be sure to register at the site so you can see large images.
Also be sure to visit http://www.caimag.com/forum/ -
The belt fits in the stock primary covers just fine. I've drilled a few holes in the inner cover, and spaced out the inspection cover with a couple of flat washers, too.
VPH-DComment
Comment