Panhead wiring routing

[camsaure]

Hi, The 50 FL is almost done, but I have several questions on wire routing, clips etc. Tried doing a search but always come up with several pages of totally unrelated stuff.
Most of my questions are around the neck area; Which way the harness goes through the neck clip. The routing of the horn wire. Which is the correct clip for the generator wire on the front down tube?

Next I have questions on the spark plug wire length and routing. was there supposed to be a clip on the frame or were they just loose in the wind with the exception of the motor mount clip?

Was there a clip on the frame for the taillight wire?

Also Chris Haynes if you are reading this, Do you have any of those excellent close up photos of 49-50 Panheads? I have noticed you post some excellent pics of other bikes in the past.

[dlark]

Here's the 49 at the museum

museum 2 020.jpgmuseum 2 021.jpgmuseum 2 022.jpgmuseum 2 032.jpgmuseum 2 043.jpg

[camsaure]

Thanks for the help. dlark

[dlark]

Came across these today if you're still working on it. Scroll to the Persian Red and he's got some wiring pics.

http://hdpaint.tk/gallery/reference/restored_hd.html/gallery/reference/restored_hd/51_fl_panhead/img09#51_fl_panhead

[camsaure]

Thanks again. According to those pics I had everything right except I put the throttle cable on wrong side of neck. Palmers book, in two different places gave conflicting info on cable routing.

[dlark]

I'd like to see any pics we could. I'm just starting to wire a 52 Pan and the wire/cable routing seems to be one of the toughest areas to figure out.

[Robert Luland]

This should help and off to Oley! Bob L

[Robert Luland]

And more!

[dlark]

Thanks Bob- These are a huge help.
Dave