1938 to 1940 Springer

[Steve Little]

1938 - 1940 Forward sweep springer on ebay
http://cgi.ebay.com/ebaymotors/Inlin...item27b9db0dd9

[exeric]

I thought the rockers, for that era fork, would not have the raised zerk boss. Otherwise, nice fork for someone.

[Chris Haynes]

Ben tell me the spring fork is a number 5.

[Steve Little]

Eric's on the ball.
I didnt notice the late rockers.
Late rockers on 1938 to 1940 foreward sweep springer.
Steve

[len dowe]

it doesn't matter what rockers are on it(late rockers were obvious). thats minor. looks like a later front leg to me, can't really see the hump if there is one. and no casting pics(ok ben). if casting #'s are good and no hump, zerks inside, 37 early 38.. easy fix for a prewar setup.

[48hdbob1]

So the '38-'40 fork has the hump above the numbers on the spring leg? thanks, Bob

it doesn't matter what rockers are on it(late rockers were obvious). thats minor. looks like a later front leg to me, can't really see the hump if there is one. and no casting pics(ok ben). if casting #'s are good and no hump, zerks inside, 37 early 38.. easy fix for a prewar setup.

[exeric]

it doesn't matter what rockers are on it(late rockers were obvious). thats minor. looks like a later front leg to me, can't really see the hump if there is one. and no casting pics(ok ben). if casting #'s are good and no hump, zerks inside, 37 early 38.. easy fix for a prewar setup.

It's only minor if you already have a set of early rockers. And that reminds me; I need an early right side rocker if anyone has one lying about.

[knuckleheadtim]

It has the later steering damper, so it's not correct for '38.