Tweet
1937 big twin
correct me if i'm wrong but these are the correct shifter pivot stud [threaded both sides,goes into gas tank bracket ] and break pedal pivot stud [again threaded on both sides ] for big twin flatheads and knuckles ?... judges jump in here 
-
Last edited by flthead; 10-05-2008, 04:50 PM. -
responce from -http://www.hydra-glide.com/index.php
FlatHeadSix Post subject: Re: 1937 bigtwin questionPosted: Mon Oct 06, 2008 3:09 am
Moderator
Joined: Sun Jun 06, 2004 5:14 pm
Posts: 642
Location: Jacksonville, AR Flthead,
Both those parts are correct for the 1937 Big Twins, flathead or OHV.
The Shift lever & Bracket Stud is part number 2206-37 (old number system) and was the first year for the double threaded stud. The shift lever stud with a shoulder and one threaded end was used from 1916 until 1936.
The Brake Lever Stud is part number 2960-36 and was introduced the previous year, 1936, for the new knucklehead frame.
mike
tried explaining this to a guy going for his senior award that these where correct for his 1937 knuckle and he had wrong parts installed..... guess even the judges don't know what's right or wrong
Comment