-
-
Saw one like it last year sold for $121k with premium so likely near same.#7558 Take me on and you take on the whole trailer park! -
I’d be curious to hear how this one looks in person when you see itComment
-
Is that the way the rear axle was designed to be oriented... with the adjuster screws against the rounded part, not the flat? Asking because I really don't know but never seen that.
Also, aren't the bolts holding the rear fender 'flip' to the braces upside down? Again, I don't know and no big deal. I've just never seen them like that.Comment
-
Lots of repro parts and wrong parts and hardware.It looks good at a distance.Comment
-
Lots of little things wrong.Be sure to visit;
http://www.vintageamericanmotorcycles.com/main.php
Be sure to register at the site so you can see large images.
Also be sure to visit http://www.caimag.com/forum/Comment
-
Yes Chris, I counted 42 that I could see in the pictures. Mostly minor but some not so. All correctible if one had the time, patience and money.
DaveComment
-
Is the tailight housing & tailight mounted too high on the fender flip ?Comment
NOTICE: New member email requirements now in effect. Longtime member having trouble logging in? Please review the requirements here.
Only registered users may post new messages on this forum. You must be an AMCA member to register. Click the register link on the top right to proceed.
If this is your first visit, be sure to check out the FAQ by clicking the link above. To start viewing messages, select the forum that you want to visit from the selection below.
If you are NOT an AMCA Member and would like to join Click Here
Tweet
Comment