Horn Button

[47Knuckle47]

Seems I ordered the wrong button, I needed a 1 wire (OEM 71800-26A. VT 32-0557)) but instead got a 2 wire that shares the same OEM number but not V-Twin part number which is VT 32-0400 can I eliminate the green wire and still use. Unfortunately, I have already fed through the bars.
Thanks,
Tim

[dukekleman]

Tim,

If you want to use the (2) wire button, you'll need to connect the 2nd wire to a good known ground location.
Hook the 1st wire up per the schematic and your horn will work when the button is depressed.

Hope this helps,

Duke Kleman

[47Knuckle47]

Excellent, thanks for the response