What is the best way to P1080809.JPG rivet a new stud onto the backing .This one is worn out and has been welded
-
-
Use a good rivet gun. Colony makes the stud and washer.Be sure to visit;
http://www.vintageamericanmotorcycles.com/main.php
Be sure to register at the site so you can see large images.
Also be sure to visit http://www.caimag.com/forum/ -
Depending on how long it has been loose you may need to repair the hole in the plate as well.Robbie Knight Amca #2736Comment
-
any idea were i can get a bit for the rivet gun that will make were you peen it look like factoryComment
-
try hanson rivets: https://www.hansonrivet.com/AMCA #41287
1971 Sprint SS350 project
1972 FX Boattail Night Train
1972 Sportster project
1973 HD Golf Cart project
1979 FXS 1200 never done playing
1989 Springer Softail project
1998 Dyna Convertible - 100% Original
96" Evo Softail self built chopper
2020 Heritage Classic 114
plus 15 other bikes over the years...Comment
Comment