Tweet
What is the best way to P1080809.JPG rivet a new stud onto the backing .This one is worn out and has been welded
-
-
Use a good rivet gun. Colony makes the stud and washer.Be sure to visit;
http://www.vintageamericanmotorcycles.com/main.php
Be sure to register at the site so you can see large images.
Also be sure to visit http://www.caimag.com/forum/ -
Depending on how long it has been loose you may need to repair the hole in the plate as well.Robbie Knight Amca #2736Comment
-
any idea were i can get a bit for the rivet gun that will make were you peen it look like factoryComment
-
try hanson rivets: https://www.hansonrivet.com/AMCA #41287
1972 FX Boattail Night Train
1972 Sportster project
1971 Sprint SS350 project
1982 FXR - AMCA 99.25 point restoration
1979 FXS 1200 never done playing
1998 Dyna Convertible - 100% Original
96" Evo Softail self built chopper
2012 103" Road King "per diem"
plus 13 other bikes over the years...Comment
Comment