Watch me..... Started with the frame, lower end motor, and tranny. I now have about everything excpet the generator, timmer, and upper end. I LOVE E-Bay........SS850591.jpg
Announcement
Collapse
No announcement yet.
Bearings
Collapse
X
-
Wyatt- the best document showing the rear hub assembly is the riders handbook. They are out there in reproduction. Another good catalog to get is from Jan Willem Boone http://www.jwboon.com/ also http://www.tomsnosparts.com/. also, you can find the parts books around- try the yahoo site mentioned by Bob Luland- there are a lot of files there. It 200 guys for JD only talk. Competion Distributing also has a variety of parts- I got a new rear axle from them, and Mark Masda at linkcycles makes some othyer rebuild parts for the rear hub.Dan Margolien
Yankee Chapter National Meet July 31/August 1 2020 at the TERRYVILLE Fairgounds, Terryville CT.
Www.yankeechapter.org
Pocketvalve@gmail.com
Comment
-
Wyatt, I brought up my question in post #15 to see if these were the correct parts you were inquiring about. If you (or anyone else) can not find certain parts for your hubs contact me, I am already starting to reproduce some JD hub parts and I could easily reproduce those. Just a sample, an original and my reproduction. Bob AMCA#6738Bob Rice #6738
Comment
-
Originally posted by wyatt emp View PostWatch me..... Started with the frame, lower end motor, and tranny. I now have about everything excpet the generator, timmer, and upper end. I LOVE E-Bay........[ATTACH=CONFIG]9780[/ATTACH]Originally posted by wyatt emp View PostHi Wyatt "......... .........
I have built a complete 1926 jd from parts sourced from eBay etc, it's is nearly finished' I started 6 years ago with just a frame, so it can be done , just got to be patient with the parts, I had a few broken rollers inthe rear axle, so I made a new axle in installed modern bearings, I still have the complete rear axle with broken bearings, if your not in to much of a hurry I will send you the parts you want when I get home (Thailand) I am currently offshore working offshore Burma, I would post some pictures but the Internet connection is to poor, I am sure that willem boon supplies the rollers you require, if not I am sure I have a source for them at home, good luck with your project I have just got even more ambitious and bought a 1912 belt drive project from EBay think this one is going to take me even longer to collect all the parts together, watch this space.
Dave
Watch me..... Started with the frame, lower end motor, and tranny. I now have about everything excpet the generator, timmer, and upper end. I LOVE E-Bay........[ATTACH=CONFIG]9780[/ATTACH]Originally posted by wyatt emp View PostHi Wyatt "......... .........
I have built a complete 1926 jd from parts sourced from eBay etc, it's is nearly finished' I started 6 years ago with just a frame, so it can be done , just got to be patient with the parts, I had a few broken rollers inthe rear axle, so I made a new axle in installed modern bearings, I still have the complete rear axle with broken bearings, if your not in to much of a hurry I will send you the parts you want when I get home (Thailand) I am currently offshore working offshore Burma, I would post some pictures but the Internet connection is to poor, I am sure that willem boon supplies the rollers you require, if not I am sure I have a source for them at home, good luck with your project I have just got even more ambitious and bought a 1912 belt drive project from EBay think this one is going to take me even longer to collect all the parts together, watch this space.
Dave
Watch me..... Started with the frame, lower end motor, and tranny. I now have about everything excpet the generator, timmer, and upper end. I LOVE E-Bay........[ATTACH=CONFIG]9780[/ATTACH]Originally posted by wyatt emp View PostHi Wyatt "......... .........
I have built a complete 1926 jd from parts sourced from eBay etc, it's is nearly finished' I started 6 years ago with just a frame, so it can be done , just got to be patient with the parts, I had a few broken rollers inthe rear axle, so I made a new axle in installed modern bearings, I still have the complete rear axle with broken bearings, if your not in to much of a hurry I will send you the parts you want when I get home (Thailand) I am currently offshore working offshore Burma, I would post some pictures but the Internet connection is to poor, I am sure that willem boon supplies the rollers you require, if not I am sure I have a source for them at home, good luck with your project I have just got even more ambitious and bought a 1912 belt drive project from EBay think this one is going to take me even longer to collect all the parts together, watch this space.
Dave
Watch me..... Started with the frame, lower end motor, and tranny. I now have about everything excpet the generator, timmer, and upper end. I LOVE E-Bay........[ATTACH=CONFIG]9780[/ATTACH]
Comment
-
Originally posted by BigLakeBob View PostWyatt, I brought up my question in post #15 to see if these were the correct parts you were inquiring about. If you (or anyone else) can not find certain parts for your hubs contact me, I am already starting to reproduce some JD hub parts and I could easily reproduce those. [ATTACH=CONFIG]9781[/ATTACH] Just a sample, an original and my reproduction. Bob AMCA#6738Cory Othen
Membership#10953
Comment
-
Picture of my 1923 JD rear hub is half way down the page at this link.
http://www.97330.com/Bills_1923_Harley/index.htmlBill Gilbert in Oregon
Comment
-
The part number is 2289-25; no one is selling these on eBay.
A list on Google: http://tinyurl.com/c83bk6y
try Lonnie
Antique Cycle Supply, Inc.
17 E Lake Street Northeast Sand Lake, MI 49343
(616) 636-8200
http://dldavedunning.tripod.com/reproduction.html says
(Contact info is at bottom of the page above)
These bearings fit many places, Sprocket shaft bearings 1930-36 VL, 1937-48 UL, 1936-54 Big Twin OHV. 1958-up Big Twin Pinion Shaft. All Star Hubs 1935-66, All VL Wheel Hubs 1930-36, Rear Wheel Hub 1923-29, Trans. Main Drive Gear 1925-36 JD & VL Models, VL, 45 & Single Transmissions, .490 long x 1/4" dia. , sold by the piece, any number needed is ok.
INV # 106 Left Case Rollers - Replaces # 9221 - +.0002" o.s. - # 2289-25D $.50 ea.
INV # 107 Left Case Rollers - Replaces # 9222 - +.0004" o.s. - # 2289-25F $.50 ea.
INV # 108 Left Case Rollers - Replaces # 9223 - +.0006" o.s. - # 2289-25H $.50 ea.
INV # 109 Left Case Rollers - Replaces # 9224 - +.0008" o.s. - # 2289-25KA $.50 ea.
INV # 110 Left Case Rollers - Replaces # 9225 - +.001 o.s. - #2289-25MA $.50 ea.
INV # 111 Left Case Rollers - Replaces # 9225A - +.002 Special Oversize $.50 ea.Bill Gilbert in Oregon
Comment
Comment