Announcement

Collapse
No announcement yet.

Tappet blocks

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tappet blocks

    Question about tappet blocks for a 45WL. I was removing my blocks and I got a little over aggressive, resulting in a chipped off corner. Started searching around for a replacement and I find some people listing them as front or rear. Are my eyes missing a detail? Because all four of them all look the same to me.
    Member# 7397

  • #2
    If you compare the slot in the bottom where the roller sits to the bolt location you will see that front and rear have different oririentation.

    Jerry

    Comment


    • #3
      Absolutely... 2 front...2 rear.
      Attached Files

      Comment


      • #4
        I take it from your post you were prying on the ears, a big NO-NO. There are several types of special tools made to remove them, and heat is highly recommended! And yes, they are front or rear.
        Robbie
        Robbie Knight Amca #2736

        Comment


        • #5
          Got it! I was looking too hard at the tops to find a difference, to see the bottoms.
          So I do need to find a rear.
          Member# 7397

          Comment


          • #6
            I have an nos rear to spare. Make an offer. Email direct for pics. vtwinrebuild@yahoo.com
            Paps

            Comment

            Working...
            X