KR pistons

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Rub
    #1

    KR pistons

    Anyone out there building flathead racers? I have a set of KR pistons with a -65R part number and need to know what might be different than earlier KR or WR pistons. I am trying to build a WR and have the late type heads and barrels. Just trying to see if these pistons will work. Thanks for the help, Robbie
    Tags: None
    • Rub
      #2
      OK now, someone out there must be messing with old racers and mixing and matching parts. Not interested in restoration info, but just in real life using info.
      Robbie

        Comment

        • c.o.
          #3
          Hey Robbie, have you tried the Flathead Power forum? Obviously someone in this club knows an answer to your question, but just hasn't read your post yet.......... Have you got a copy of What Fits What? It's got a bit about fitting odd parts together.

          http://www.flatheadpower.com/tech/viewforum.php?f=19

            Comment

            • TIM 435
              #4
              Are the tops flat or domed ? if flat you shouldn't have a problem, Tim

                Comment

                • Rub
                  #5
                  Tim, thanks for the reply but that doesn't really help. The pistons are flat top like regular flathead varieties but appear to be taller from the pin hole to the top. I have a WL piston, K piston and these later KR pistons and I am trying to figure out the differences. Other than the obvious visual differences I am hoping someone has some actual experience to draw on. Thanks again and Happy New Year. Robbie

                    Comment

                    Previous template Next
                    Working...