Announcement

Collapse
No announcement yet.

35 vld wiring help needed

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 35 vld wiring help needed

    So I got the bike wired up by the wiring diagram with new loom and repop dash with westin amp guage with needle pointing forward. I'm using a 6v modern battery and a 3 brush 32e with a solid state relay. I have a yellow wire and 2 red wires in the battery box to hook up. What color goes to what on the battery? I'm assuming its.positive ground so yellow goes to negative? Also should I have a ground wire from the box the the negative battery terminal?

    Does it matter which way current flows through the relay and the coil?
    thanks


  • #2
    My '36 VL is Negative Ground. I'm not sure of colors on the loom.
    Jim

    AMCA #6520

    Comment


    • #3
      "westin amp guage with needle pointing forward". So that's the earlier amp gauge which means the yellow wire goes from the right side terminal of the gauge to the battery negative (negative ground).
      The 2 red wires go from 1) battery positive to relay, and 2) battery positive to left hand terminal of headlight key switch on dash.

      "a 3 brush 32e with a solid state relay". If by solid state you mean a modern electronic regulator then that could be a problem with a 3 brush generator.
      I think the modern regulator needs to go with a 2 brush gen.

      Comment

      Working...
      X