OK, I got the coil out tonight. Thanks again everyone for the help. I would never of thought to look under the horn button for that pesky little bushing screw.
Here's how I got it out on the first try.
1)- Took a piece of coated wire and inserted it thru thu the horn button hole and thru the coil then out thru the end of h/bar. (Not as tough to do as it sounds)
2)- Tied a knot in coated wire, just before horn buttom hole leaving about 1ft. extra incase I needed to extract it. Then I forced the knot down the horn button hole.
3)- Gave a couple tugs to the loose end sticking out from h/bar and I was done.
Hey Paps, Would you mind an e-mail? The wife and I love g-lake and you can find me any thursday evening at yankee lake. Just look for my 56pan cause this 45WL may take a while. -Steve
Here's how I got it out on the first try.
1)- Took a piece of coated wire and inserted it thru thu the horn button hole and thru the coil then out thru the end of h/bar. (Not as tough to do as it sounds)
2)- Tied a knot in coated wire, just before horn buttom hole leaving about 1ft. extra incase I needed to extract it. Then I forced the knot down the horn button hole.
3)- Gave a couple tugs to the loose end sticking out from h/bar and I was done.
Hey Paps, Would you mind an e-mail? The wife and I love g-lake and you can find me any thursday evening at yankee lake. Just look for my 56pan cause this 45WL may take a while. -Steve
Comment