Announcement

Collapse
No announcement yet.

Corbin Drive & Star Hub

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Corbin Drive & Star Hub

    Morning,
    I'm planning to run Star Hubs on my VL project and wanted to ask if anyone has mated a Corbin Drive Hub to a Star Hub? Did Corbin make a drive tab washer that fits in the two opposing notches on the Star Hub outer thrust bearing cover? I know I will need a thin axle spacer to avoid the thrust bearing cover from rubbing the back of the axle sleeve on the Corbin drive hub. Any suggestions would be appreciated.
    Thanks
    Attached Files
    William Edwards, AMCA #10035

    Attend the 2019 Southern National Meet at Denton Farmpark, NC, 17-18 May 2019
    http://www.amcasouthernnationalmeet.com/

  • #2
    Yes Corbin made a drive tab washer for Harley. Buy a VL one. The Harley ones are wider than the Indian ones. The washer are spring steel and if you don't heat them to bend them they will brake.

    Comment


    • #3
      Thanks Terry. Know of a source for the VL tab washer?
      William Edwards, AMCA #10035

      Attend the 2019 Southern National Meet at Denton Farmpark, NC, 17-18 May 2019
      http://www.amcasouthernnationalmeet.com/

      Comment


      • #4
        I buy the Indian ones from Greer's and bend them to fit Harley's.

        Comment

        Working...
        X