TAking apart VL hubs

[danf19]

I am trying to take apart the hubs for my VL project. Not the best set but they'll do for now. I have read steve's book but wondering if anyone has actual pics of the process. I understand there's a proper tool. Any pics of that ?
Any help is greatly appreciated.
thanks
dan

[Mark Jennings]

Dan, I tried to PM you back and was told "danf19 has exceeded their stored private messages quota and cannot accept further messages until they clear some space" Thank you Mark.

[wideglide38]

Mark, I plan to tear my VL wheels apart. I would like to see pics this tool if possible? Thanks William

[don]

Look on the replicant metal site, there is a picture. I bought mine from Steve when I placed an order the last time. Either place has one for around $65 I think.

[Steve Slocombe]

Try Steve White at Vintage Motorcycles Northwest on 253.846.2775 as well for the VL wheel hub tool. Once you've got the outer lock ring and nut off, knock the wheel hub assembly through from the splined end. From the exploded diagram and cross section in my book you should be able to figure out what goes where.

[danf19]

Seems to be a shortage of Vl wheel hub tools from a few of the Vl guys. Anyone have any recommendations or one to sell ??
Thanks
Dan

[RPjr]

make your own

Seems to be a shortage of Vl wheel hub tools from a few of the Vl guys. Anyone have any recommendations or one to sell ??
Thanks
Dan

large washer and 1/4 inch key stock. 1/8 inch flat stock and 1 key stock for lock ring.