I am dis-assembling the fuel tanks from my '36 VL frame - they came attached along with a few other items when I purchased the frame. First off, did the factory paint the area between the two tank sides or were they just primed ?? Mine is an off white while the rest of the tanks is red. Secondly, the tanks look solid but have a few dents. Can anyone recommend someone to remove the dents ? I understand they can be cut open then re-welded. Any other tips ??
Lastly, I wanted to get a few stud removers for my VL project - mainly for the cylinder base studs and transmission studs. I believe the cylinder base studs are 7/16x20 but what about the transmission studs ?? can anyone recommend others that would be helpful for the project ??
as always,
thanks
Dan
Lastly, I wanted to get a few stud removers for my VL project - mainly for the cylinder base studs and transmission studs. I believe the cylinder base studs are 7/16x20 but what about the transmission studs ?? can anyone recommend others that would be helpful for the project ??
as always,
thanks
Dan
Comment