Bent Brass Lever

[cycarmark]

I recently purchased a throttle and air assembly for my 21 Cleveland and the throttle lever is bent down. Attached is a picture of it and a picture of the way it should be. Any thoughts on how to straighten it, heat or not, press or hammer, any ideas are welcome!

[T. Cotten]

No heat, Cycarmark!

Chill brass.

(No hammer either...)

....Cotten

[cycarmark]

Tom,

No heat, gentle pressing, lever is nice and straight now!

Thanks

Mark

[T. Cotten]

Tom,

No heat, gentle pressing, lever is nice and straight now!

Thanks

Mark

Great Mark!

I'm collecting my brass and bronze work for mid-January,...

Since there seems to be no local source for dry-ice any more.

....Cotten

[cycarmark]

I guess I did use heat, it was 78 degrees here today!

[painterdale]

Nicely done!

Dale