I would like to install a delco remy horn on my WLA (to replace the replica one I have), someone knows if it possible to open the horn back to install it on the wla backet, I tried to remove it but the central back part doesn't move...
-
-
that is riveted together is why---i send my horns to
HORN MAN
CHARLES SHAVER
696 SW 70TH LANE
LIBERAL, MO. 64762
417-394-2788
he is very reasonable and when he's finished the horn is VERY loud and every piece is finished correctly ready to bolt on the bike. is is usually at davenport -
It is possible. The rivet looking protrusion on the back is in fact peened over the data plate washer. It is part of the round steel "core" that the wire wraps on. If you only have one to do it might be better to send it off because it took me a few times to get the first one right.
JerryComment
-
Does it means that the round plate washer (where is written "Delco Remy 16") is on piece with the rivet...? What happen if I remove the rivet ?
I didn't find any figures concerning of how is assembled this horn!Comment
-
If you clean up the end (unpeen it) that protudes thru the data plate washer everthing will come apart. I have turned out new center 'cores' or I have used the ones from automotive Delco 16 horns which were sometimes longer to accomodate a thicker bracket.
JerryComment
-
Hey Flat-Happy does he chrome the face also or is this something I have to have done?Originally posted by flat-happy View PostComment
-
If you have a original black painted face I have a friend who will trade you a chrome face for it.Originally posted by gallen View PostBe sure to visit;
http://www.vintageamericanmotorcycles.com/main.php
Be sure to register at the site so you can see large images.
Also be sure to visit http://www.caimag.com/forum/Comment
-
Chris,Originally posted by Chris Haynes View Post
Thanks for answering. Is the chrome face in good condition as far as dents and is it brass or steel. The one I have has two small dings. I can send some pictures of it.Comment
-
Chrome faces are brass. Black painted are steel.Be sure to visit;
http://www.vintageamericanmotorcycles.com/main.php
Be sure to register at the site so you can see large images.
Also be sure to visit http://www.caimag.com/forum/Comment
-
Chris, I would be interested in trading for a brass face as it would be the correct one for my Knuckle. Let me know.Comment
-
Here is a NOS horn.
http://cgi.ebay.com/ebaymotors/1930-...item5adb1814feBe sure to visit;
http://www.vintageamericanmotorcycles.com/main.php
Be sure to register at the site so you can see large images.
Also be sure to visit http://www.caimag.com/forum/Comment
-
Delco Horn
Chris, My horn has the winged face. Does your friends?Comment
-
Yes.......Originally posted by gallen View PostBe sure to visit;
http://www.vintageamericanmotorcycles.com/main.php
Be sure to register at the site so you can see large images.
Also be sure to visit http://www.caimag.com/forum/Comment
-
How does he want to work a trade? Does he want pictures to see condition? What condition is his in?Comment
Comment