Work stand for 1934 VL

[Mark Woodstock]

Once you have the rear wheel or rear stand on, you can put the foot board shaft through the front frame loop and sit 2 axle stands under it. Seems to work great.

[Chris Haynes]

Not really related but I’m curious if putting a bike on the rear stand was meant to be a one man operation? Is there a technique to doing it? Or am I really that out of shape?

Stand behind the bike and pull it up onto the stand. Takes a little getting used to.

[Ohio-Rider]

Not really related but I’m curious if putting a bike on the rear stand was meant to be a one man operation? Is there a technique to doing it? Or am I really that out of shape?

[leomags]

Thanks for the tip.

[Chris Haynes]

Install the rear stand on the frame and put it down. Install the forward footboard support rod into the frame and place a jackstand on each side if it. Your bike is now in a secure position to work on.

[leomags]

What can I make or buy that will serve as a stand to hold the frame of a VL while I put everything back together?